Select Page

Fleetguard AA90272 Air Filter

The AA90272 Air Filter is a professional dry-type air filtration component, specially engineered for heavy-duty commercial vehicles and construction machinery diesel engines. It is designed to fit the original air intake system perfectly, providing reliable air purification protection in high-dust, high-vibration working environments. With strict compliance with OEM manufacturing standards, it ensures consistent performance and seamless matching with host equipment, becoming a core part of engine intake system maintenance.

Adopting high-density composite filter media and a precision pleating process, this air filter effectively captures airborne particles such as dust, sand and gravel. It strictly controls the particulate matter entering the engine cylinder, avoids abrasive wear of internal components like pistons and crankshafts, and maintains the stability of engine combustion efficiency during long-term continuous operation. The optimized filter element structure also maximizes the filtration area and prolongs the service life of the filter.

Featured with a standardized modular design, the AA90272 Air Filter has a simple and firm installation structure, enabling quick disassembly and replacement without professional tools. It is adaptable to a variety of mainstream heavy-duty machine models, with strong environmental compatibility and stable performance under extreme temperature and humidity conditions, effectively reducing equipment maintenance frequency and operational costs for users.

Advantages of AA90272 Air Filter

  • High-precision Filtration: Adopts high-quality composite filter media with a multi-layer structure, achieving ultra-high particle capture capacity, effectively filtering fine impurities above 5μm in the air, and ensuring the purity of intake air to protect the engine from wear.

  • Long Service Life: The precision pleating process and large effective filtration area increase the dust holding capacity of the filter element, slow down the pressure drop rise speed, and extend the replacement cycle of the filter, reducing the frequency of maintenance and replacement.

  • Strong Environmental Adaptability: The filter shell and sealing parts are made of high-strength, high-temperature and corrosion-resistant materials, with excellent sealing and vibration resistance, and can maintain stable filtration performance in harsh working conditions such as high temperature, low temperature and heavy dust.

  • Easy Installation & Replacement: With a standardized original matching interface and a simple fixed structure, it can be quickly installed and disassembled without additional professional tools, saving maintenance time and improving the efficiency of equipment daily maintenance.

Technical Specifications

Part Number: AA90272
Filter Type: Dry Type Air Filter
Dimensions: 320×210×380mm
Connection Specs: Thread Specification: Φ90mm Flange Type
Filtration Precision: 5μm
Filtration Efficiency: ≥99.6% (ISO 4548 Standard)
Applicable Models/Platforms: Heavy-duty commercial vehicle/construction machinery diesel models
Operating Conditions: -40℃~+125℃; ≤95% Relative Humidity
Lead Time: 15 – 30 Working Days
Payment Terms: T/T ,L/C

Coming soon

Coming soon

Coming soon

Filter Model

Dimensions

Connection Specs

Filtration Precision

Filtration Efficiency

AA90272 320×210×380mm Thread Specification: Φ90mm Flange Type 5μm ≥99.6% (ISO 4548 Standard)
AA90273 340×220×400mm Thread Specification: Φ95mm Flange Type 5μm ≥99.6% (ISO 4548 Standard)
AA90274 360×230×420mm Thread Specification: Φ100mm Flange Type 5μm ≥99.7% (ISO 4548 Standard)
AA90275 380×240×450mm Thread Specification: Φ105mm Flange Type 5μm ≥99.7% (ISO 4548 Standard)
AA90276 ID 95.3mm, OD 161.9mm, Length 374.7mm Thread Specification: 95.3mm/161.9m 3μm 95% (ISO 4548 Standard)
AA90158 ID 95mm/OD 162mm/L 375mm Thread Specification: 95/162mm interface, side-mounted 3μm ≥95% (ISO 4548 Standard)
AA90128 ID 95mm/OD 162mm/L 375mm Thread Specification: 95/162mm interface, side-mounted 3μm ≥95% (ISO 4548 Standard)
AA90152 ID 95mm/OD 162mm/L 375mm Thread Specification: 95/162mm interface, side-mounted 3μm ≥95%(ISO 4548 Standard)
AA90129 ID 95mm/OD 162mm/L 375mm Thread Specification:95/162mm interface, side-mounted 3μm ≥95% (ISO 4548 Standard)
AA90127 ID 95mm/OD 162mm/L 375mm Thread Specification:95/162mm interface, side-mounted 3μm ≥95% (ISO 4548 Standard)
——END——

General Infomation of DCEC C220-10A Automotive Engine

Engine Model C220-10A Advertised Power 220 HP @ 2400 RPM
Peak Torque 780 N.m @ 1500 RPM Curve&Datasheet FR 91484
Fuel System Bosch P7100 Pump No. Of Cylinders 6
Aspiration Turbocharged & Air Intercooler Displacement 8.3 L
Bore * Stroke 114 mm * 135 mm CPL Code Revision 8418
Dry Weight  617 kg Wet Weight  636 kg
Compression Ratio 17.3 : 1

Installation Data of DCEC C220-10A Automotive Engine

Center of Gravity. Distance From Front Face of Block 427 mm
Center of Gravity. Distance Above Crank Centerline(Above Crankshaft) 163 mm
Maximum Bending Moment At Rear Face of Block 1356 N.m
Maximum Crankshaft Thrust Bearing load limit- Intermittent load 3558 N
Maximum Crankshaft Thrust Bearing load limit-Continuous load 2670 N
Instantaneous Inertia At Rotating: (Without Flywheel)  N/A
Emissions Certification GB17691/GB14761
Idle Speed 800 RPM
Maximum Non-Load Speed 2720 RPM
Over Speed Performance (Within 15 Seconds) 3500 RPM
The Clutch Torque @ 800Rpm 495 N.m
Maximum Altitude At Which Continuous operation Is Allowed 3000 m
Supercharger outlet Exhaust Pressure limit Value  450 kPa
Maximum Power of Exhaust Brake 114 kW
——END——

Engine Performance Data Rated power of DCEC C220-10A Automotive Drive Engine

Rated Power Torque Peak Rated Power Torque Peak
Engine Speed 2400 RPM 1500 RPM Exhaust Temperature 625 ℃ 602 ℃
Oil Pressure 345 kPa 282 kPa Fuel Consumption 43 L/hr 26.9 L/hr
The Air Flow 18.9 m³/min 9.1 m³/min Coolant Flow N/A N/A
The Flow Rate of Pressurized Air N/A N/A Heat Loss Coolant 77 kW 60 kW
Pressurized Air Pressure N/A N/A Heat Loss Air 46 kW 14 kW
The Exhaust Flow 45 m³/min 21.3 m³/min Mechanical Loss of Power N/A N/A

Performance-Curve-of-C220-10A-Engine-for-Vehicle.webp

System Technical Data of DCEC C220-10A Automotive Drive Engine

Air Intake System Maximum Temperature Rise Between Ambient Air and Engine Air Inlet 15 ℃
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Medium Duty 2.9 (300) kPa (mmH2O)
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Heavy Duty 3.7 (380) kPa (mmH2O)
Maximum Intake Restriction with Dirty Filter 6.2 (635) kPa (mmH2O)
Turbocharged & Intercooled Maximum Intake Manifold Temperature-Second Level 55 ℃
Maximum Intake Manifold Temperature-Three-Level 50 ℃
Intercooler Cooling Temperature-Second Level 25 ℃
Intercooler Cooling Temperature-Three-Level 20 ℃
Maximum Allowable Pressure Difference Before and After Intercooling-Three-Level 16.7 (125) kPa(mmHg)
Minimum Inlet Pipe Diameter Allowed-Three-Level 75 mm
Exhaust System Maximum Back Pressure Imposed by Complete Exhaust System 10.0 (75) kPa (mmHg)
Exhaust Pipe Size Normally Accepable 75 mm
Maximum Static Bend Allowed for Turbocharger Exhaust Flange N/A
Lubrication System Low oil Level Inclination Angle-Front Up 45 °
Low oil Level Inclination Angle-Back Up 45 °
Low oil Level Inclination Angle-Fuel Pump Side Up 45 °
Low oil Level Inclination Angle-Exhaust Side Up 45 °
Oil Sump Capacity-Upper Limit 14.2 L
Oil Sump Capacity-Lower Limit 12.4 L
Capacity of The Whole System 16.4 L
Cooling System Coolant Capacity – Engine only 9 L
Standard Thermostat (Modulating) Range 83 – 95 ℃
Minimum Fill Rate ( Without Low Level Alarm) 19 L/min
Minimum Coolant Expansion Space – % of System Capacity 6 %
Water Tank Capacity Without Water Expansion 6 L
Maximum Coolant Pressure (Without Pressure Cap, Thermostat Closed) 276 kPa
Maximum Degassing Time 25 mins
Maximum Coolant Flow to Accessories 41 L/min
Maximum Coolant Temperature Engine out 100 ℃
Minimum Allows Pressure of Pressure Cap 50 kPa
Minimum Recommended Coolant Temperature 70 ℃
Common Operating Temperature Range of Fans with Fan Clutch 93 ℃
Maximum Coolent Temperature For Engine Protection Control 100 ℃
The Limit Environmental Temperature at Rated Speed Second Level 45 ℃;Three-Level 42 ℃
The Limit Environmental Temperature at Peak Torque Second Level 40 ℃;Three-Level 37 ℃
24V Electrical System Maximum Allowable Resistance of Cranking Circuit 0.002 Ω
The Cold Start Current When Engine and The Clutch Separate 12 V 500 24 V 250
Cold Starting System Maximum Unaided Cold Start Temperature 120 RPM -10 ℃ 
Maximum Aided Cold Start Temperature 110 RPM -35 ℃ 
Fuel System Maximum Fuel Return Resistance 520 (mmHg)
Maximum Inlet Resistance of oil Pump with Clean Filter 150 (mmHg)
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

Global Activity

WhatsApp Online logo

Online Service


Sales Director-Mr.Jasper Lee

Sales Manager-Mrs.Wendy Fu

Spare Parts Sales-Miss. Nora Cao

After-Sales Manager-Ms. Tina Zhang

Merchandiser-Miss. Yoyo Tao

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.fleetguard-filter.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest