+86-755-8231-4520 info@fleetguard-filter.com
Select Page

Fleetguard AF00890 00JX Air Filter Element

AF00890 00JX is a Fleetguard industrial air filter element, suitable for light, medium and heavy engineering machinery, mobile diesel power units and other working conditions, with performance fully exceeding OEM standards, especially adapted to the narrow air intake installation space of equipment.

Adopting high air permeability and low resistance nanofiber filter media, it features optimized corrugation spacing design and reinforced radial sealing structure, with an overall compact and lightweight design for easy disassembly, assembly and maintenance.

With a filtration efficiency of 99.99%, it can efficiently intercept dust and gravel particles in the intake air, greatly reduce wear on engine cylinder blocks, pistons and other components, and provide continuous and stable intake air protection for the power system.

Advantages of  AF00890 00JX Air Filter Element

  • Excellent space adaptability: Compact structural design, perfectly adapted to the narrow air intake installation position of equipment with strong installation compatibility.

  • Balanced filtration efficiency and air flow: High air permeability nanofiber filter media achieves 99.99% high-precision filtration while reducing intake resistance

  • More reliable sealing: Reinforced radial sealing structure fits the mounting surface tightly and completely prevents impurity side leakage.

  • Low operation and maintenance cost: High dirt-holding capacity extends the replacement cycle, and the lightweight design reduces disassembly and assembly man-hours and lowers downtime losses.

Technical Specifications

Part Number:
AF00890 00JX
Filter Type:Primary Air Filter Element, Dry Pleated
Dimensions:OD≈φ250mm*ID 135mm,
Total Height≈360mm
Connection SpecsThread Specification: Flange connection (135mm), snap-fit fixation
Filtration Precision:Nominal 20μm, Absolute 10μm
Filtration Efficiency:≥99.9%(for particles ≥0.3μm)
Applicable Models/Platforms:Cummins series, Komatsu super-large excavators, etc.
Operating Conditions:-40℃~120℃, Humidity 0~95%, Normal pressure
Lead Time:15 – 30 Working Days
Payment Terms:T/T ,L/C
DongFeng EQ6603LTBEV Electric bus video
your 360 images

Filter Model

Dimensions

Connection Specs

Filtration Precision

Filtration Efficiency

AF00890 00JXOD≈φ250mm*135mm,Total Height≈360mmFlange connection (135mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00947 00JXOD≈φ320mm*165mm,Total Height≈450mmFlange connection (165mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00935M 00JXOD≈φ280mm*150mm, Total Height≈400mmFlange connection (150mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00934 00JXOD≈φ260mm*140mm,Total Height≈380mmFlange connection (140mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF04548 00JXOD≈φ300mm*155mm, Total Height≈420mmFlange connection (155mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00821M 00JXOD≈φ280mm*130mm, Total Height≈350mmFlange connection (130mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00421M 00JXOD≈φ220mm*120mm,Total Height≈320mmFlange connection (120mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF25454 00JXOD≈φ310mm*160mm, Total Height≈440mmFlange connection (160mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00891M 00JXOD≈φ270mm*145mm,Total Height≈390mmFlange connection (145mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00872M 00JXOD≈φ290mm*152mm, Total Height≈410mmFlange connection (152mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00883M 00JXOD≈φ285mm*148mm,Total Height≈395mmFlange connection (148mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF25278 00JXOD≈φ330mm*162mm, Total Height≈460mmFlange connection (162mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00851M 00JXOD≈φ275mm*146mm,Total Height≈392mmFlange connection (146mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00880 00JXOD≈φ265mm*142mm, Total Height≈385mmFlange connection (142mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF00899M 00JXOD≈φ295mm*154mm,Total Height≈415mmFlange connection (154mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF899M/AF880OD≈φ295/265mm*154/142mm,
Total Height≈415/385mm		Flange connection (165/142mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF890/AF891-A 00JXOD≈φ250/270mm*135/145mm,
Total Height≈360/390mm		Flange connection (135/145mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF879M/AF857OD≈φ255/272mm*138/144mm,
Total Height≈370/388mm		Flange connection (138/144mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF857/AF879MOD≈φ255/272mm*138/144mm,
Total Height≈370/388mm		Flange connection (138/144mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF26617/AF26618OD≈φ320/340mm*161/163mm,
Total Height≈450/470mm		Flange connection (161/163mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF935M/AF934OD≈φ280/260mm*150/140mm,
Total Height≈400/380mm		Flange connection (150/140mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF890/AF891M-AOD≈φ250/270mm*135/145mm,
Total Height≈360/390mm		Flange connection (135/145mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF26605 00JXOD≈φ350mm*165mm,Total Height≈450mmFlange connection (165mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF26569 00JXOD≈φ350mm*165mm, Total Height≈480mmFlange connection (165mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF550578PJXOD≈φ360mm*168mm,Total Height≈490mmFlange connection (168mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
AF553318PJXOD≈φ370mm*170mm, Total Height≈500mmFlange connection (170mm), snap-fit fixationNominal 20μm, Absolute 10μm≥99.9%(for particles ≥0.3μm)
——END——

General Infomation of DCEC C220-10A Automotive Engine

Engine ModelC220-10AAdvertised Power220 HP @ 2400 RPM
Peak Torque780 N.m @ 1500 RPMCurve&DatasheetFR 91484
Fuel SystemBosch P7100 PumpNo. Of Cylinders6
AspirationTurbocharged & Air IntercoolerDisplacement8.3 L
Bore * Stroke114 mm * 135 mmCPL Code Revision8418
Dry Weight 617 kgWet Weight 636 kg
Compression Ratio17.3 : 1

Installation Data of DCEC C220-10A Automotive Engine

Center of Gravity. Distance From Front Face of Block427 mm
Center of Gravity. Distance Above Crank Centerline(Above Crankshaft)163 mm
Maximum Bending Moment At Rear Face of Block1356 N.m
Maximum Crankshaft Thrust Bearing load limit- Intermittent load3558 N
Maximum Crankshaft Thrust Bearing load limit-Continuous load2670 N
Instantaneous Inertia At Rotating: (Without Flywheel) N/A
Emissions CertificationGB17691/GB14761
Idle Speed800 RPM
Maximum Non-Load Speed2720 RPM
Over Speed Performance (Within 15 Seconds)3500 RPM
The Clutch Torque @ 800Rpm495 N.m
Maximum Altitude At Which Continuous operation Is Allowed3000 m
Supercharger outlet Exhaust Pressure limit Value 450 kPa
Maximum Power of Exhaust Brake114 kW
——END——

Engine Performance Data Rated power of DCEC C220-10A Automotive Drive Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2400 RPM1500 RPMExhaust Temperature625 ℃602 ℃
Oil Pressure345 kPa282 kPaFuel Consumption43 L/hr26.9 L/hr
The Air Flow18.9 m³/min9.1 m³/minCoolant FlowN/AN/A
The Flow Rate of Pressurized AirN/AN/AHeat Loss Coolant77 kW60 kW
Pressurized Air PressureN/AN/AHeat Loss Air46 kW14 kW
The Exhaust Flow45 m³/min21.3 m³/minMechanical Loss of PowerN/AN/A

Performance-Curve-of-C220-10A-Engine-for-Vehicle.webp

System Technical Data of DCEC C220-10A Automotive Drive Engine

Air Intake SystemMaximum Temperature Rise Between Ambient Air and Engine Air Inlet15 ℃
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Medium Duty2.9 (300) kPa (mmH2O)
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Heavy Duty3.7 (380) kPa (mmH2O)
Maximum Intake Restriction with Dirty Filter6.2 (635) kPa (mmH2O)
Turbocharged & IntercooledMaximum Intake Manifold Temperature-Second Level55 ℃
Maximum Intake Manifold Temperature-Three-Level50 ℃
Intercooler Cooling Temperature-Second Level25 ℃
Intercooler Cooling Temperature-Three-Level20 ℃
Maximum Allowable Pressure Difference Before and After Intercooling-Three-Level16.7 (125) kPa(mmHg)
Minimum Inlet Pipe Diameter Allowed-Three-Level75 mm
Exhaust SystemMaximum Back Pressure Imposed by Complete Exhaust System10.0 (75) kPa (mmHg)
Exhaust Pipe Size Normally Accepable75 mm
Maximum Static Bend Allowed for Turbocharger Exhaust FlangeN/A
Lubrication SystemLow oil Level Inclination Angle-Front Up45 °
Low oil Level Inclination Angle-Back Up45 °
Low oil Level Inclination Angle-Fuel Pump Side Up45 °
Low oil Level Inclination Angle-Exhaust Side Up45 °
Oil Sump Capacity-Upper Limit14.2 L
Oil Sump Capacity-Lower Limit12.4 L
Capacity of The Whole System16.4 L
Cooling SystemCoolant Capacity – Engine only9 L
Standard Thermostat (Modulating) Range83 – 95 ℃
Minimum Fill Rate ( Without Low Level Alarm)19 L/min
Minimum Coolant Expansion Space – % of System Capacity6 %
Water Tank Capacity Without Water Expansion6 L
Maximum Coolant Pressure (Without Pressure Cap, Thermostat Closed)276 kPa
Maximum Degassing Time25 mins
Maximum Coolant Flow to Accessories41 L/min
Maximum Coolant Temperature Engine out100 ℃
Minimum Allows Pressure of Pressure Cap50 kPa
Minimum Recommended Coolant Temperature70 ℃
Common Operating Temperature Range of Fans with Fan Clutch93 ℃
Maximum Coolent Temperature For Engine Protection Control100 ℃
The Limit Environmental Temperature at Rated SpeedSecond Level 45 ℃;Three-Level 42 ℃
The Limit Environmental Temperature at Peak TorqueSecond Level 40 ℃;Three-Level 37 ℃
24V Electrical SystemMaximum Allowable Resistance of Cranking Circuit0.002 Ω
The Cold Start Current When Engine and The Clutch Separate12 V 500 24 V 250
Cold Starting SystemMaximum Unaided Cold Start Temperature120 RPM -10 ℃ 
Maximum Aided Cold Start Temperature110 RPM -35 ℃ 
Fuel SystemMaximum Fuel Return Resistance520 (mmHg)
Maximum Inlet Resistance of oil Pump with Clean Filter150 (mmHg)
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

Tags: AF00890 00JX | Air Filter Element | Fleetguard

Other Models in this Series

WhatsApp Online logo

Sales Team

Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service -SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest