Select Page

Fleetguard FS01000 00MX Oil-Water Separator

This FS01000 00MX Oil-Water Separator belongs to the professional FS series, engineered for high-efficiency oil-water separation in diesel engine fuel systems. It adopts advanced filtration core technology to effectively capture water droplets and solid impurities in fuel, with stable performance under complex working conditions. The product is designed in line with industrial universal standards, featuring compact structure and easy installation, which perfectly matches the layout requirements of various mechanical equipment fuel systems.

It has excellent adaptability to different grades of diesel fuel, and can maintain high separation efficiency even in extreme temperature environments of -40℃ to 80℃. The high-strength shell is made of anti-corrosion and pressure-resistant materials, which can withstand the impact of fuel pressure fluctuations and avoid oil leakage and other failures, ensuring the safe and reliable operation of the whole machine for a long time.

The product strictly follows international quality control standards in the production process, with precise internal components and tight sealing structure. It can reduce the wear of engine fuel injection system components, extend the service life of the engine and related parts, and lower the later maintenance cost of equipment, which is an essential core component for improving the operation efficiency of diesel machinery.

Advantages of  FS01000 00MX Oil-Water Separator

  • High-efficiency separation performance: The integrated high-precision filtration core can achieve rapid separation of oil and water, with water removal efficiency of over 95% and solid particle filtration accuracy up to 10μm, effectively purifying diesel fuel and preventing harmful impurities from entering the engine.

  • Strong environmental adaptability: The whole machine is optimized for structural design and material selection, which can work stably in high and low temperature, high humidity and dusty harsh working environments, and has good anti-vibration and anti-impact performance, adapting to the frequent working condition changes of engineering machinery and commercial vehicles.

  • Durable and reliable quality: The high-strength anti-corrosion shell and high-quality sealing parts ensure the product has excellent pressure resistance and leak-proof performance, with a long service life of the core components, reducing the frequency of replacement and maintenance, and improving the continuous operation time of the equipment.

  • Humanized installation and maintenance: Compact and lightweight design, with standardized interface dimensions, which is consistent with the universal installation specifications of the industry, easy to install and disassemble; the quick-opening structure design of the core part enables fast replacement of the filtration core, saving maintenance time and labor costs.

Technical Specifications

Part Number:FS01000 00MX
Filter Type:Oil-Water Separator
Dimensions:Outer Diameter≈Φ90~110mm, Overall Height≈170~200mm
Connection Specs:Thread Specification: 1/2″ NPT Female Thread
Filtration Precision:10μm
Filtration Efficiency:≥95% (ISO 4548 Standard)
Applicable Models/Platforms:Construction Machinery/Commercial Vehicle/Diesel Engine (2.8-4.5L)
Operating Conditions:-40℃~80℃; Working Pressure ≤1.0MPa
Lead Time:15 – 30 Working Days
Payment Terms:T/T ,L/C

Coming soon

Filter Model

Dimensions

Connection Specs

Filtration Precision

Filtration Efficiency

FS01000 00MXOuter Diameter≈Φ90~110mm, Overall Height≈170~200mmThread Specification: 1/2″ NPT Female Thread10μm≥95% (ISO 4548 Standard)
FS01280 00MXOuter Diameter≈90-95mm, Overall Height≈240-250mmThread Specification:Oil Port M14/M16/M1820-25μm≥95% (ISO 4548 Standard)
FS01251 00MXOuter Diameter≈90-95mm, Overall Height≈240-250mmThread Specification: M14/M16/M1820-25μm≥95% (ISO 4548 Standard)
FS01003 00MXOuter Diameter≈90-95mm, Overall Height≈240-250mmThread Specification: M14/M16/M1820-25μm≥95%(ISO 4548 Standard)
FS01235 00MXOuter Diameter≈70-80mm, Overall Height≈100-120mmThread Specification: M16×1.520-25μm≥95% (ISO 4548 Standard)
FS01040 00MXOuter Diameter≈Φ90~110mm, Overall Height≈170~200mmThread Specification: 1/2″ NPT Female Thread10μm≥95% (ISO 4548 Standard)
FS01212 00MXOuter Diameter≈Φ90~110mm, Overall Height≈170~200mmThread Specification: 1/2″ NPT Female Thread5μm≥98% (ISO 4548 Standard)
FS01006 00MXOuter Diameter≈116.2~116.5mm, Overall Height≈ 313.0~314.2mmThread Specification: 1 1/4-12UNS-2B10μm≥98%(ISO 4548 Standard)
——END——

General Infomation of DCEC C220-10A Automotive Engine

Engine ModelC220-10AAdvertised Power220 HP @ 2400 RPM
Peak Torque780 N.m @ 1500 RPMCurve&DatasheetFR 91484
Fuel SystemBosch P7100 PumpNo. Of Cylinders6
AspirationTurbocharged & Air IntercoolerDisplacement8.3 L
Bore * Stroke114 mm * 135 mmCPL Code Revision8418
Dry Weight 617 kgWet Weight 636 kg
Compression Ratio17.3 : 1

Installation Data of DCEC C220-10A Automotive Engine

Center of Gravity. Distance From Front Face of Block427 mm
Center of Gravity. Distance Above Crank Centerline(Above Crankshaft)163 mm
Maximum Bending Moment At Rear Face of Block1356 N.m
Maximum Crankshaft Thrust Bearing load limit- Intermittent load3558 N
Maximum Crankshaft Thrust Bearing load limit-Continuous load2670 N
Instantaneous Inertia At Rotating: (Without Flywheel) N/A
Emissions CertificationGB17691/GB14761
Idle Speed800 RPM
Maximum Non-Load Speed2720 RPM
Over Speed Performance (Within 15 Seconds)3500 RPM
The Clutch Torque @ 800Rpm495 N.m
Maximum Altitude At Which Continuous operation Is Allowed3000 m
Supercharger outlet Exhaust Pressure limit Value 450 kPa
Maximum Power of Exhaust Brake114 kW
——END——

Engine Performance Data Rated power of DCEC C220-10A Automotive Drive Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2400 RPM1500 RPMExhaust Temperature625 ℃602 ℃
Oil Pressure345 kPa282 kPaFuel Consumption43 L/hr26.9 L/hr
The Air Flow18.9 m³/min9.1 m³/minCoolant FlowN/AN/A
The Flow Rate of Pressurized AirN/AN/AHeat Loss Coolant77 kW60 kW
Pressurized Air PressureN/AN/AHeat Loss Air46 kW14 kW
The Exhaust Flow45 m³/min21.3 m³/minMechanical Loss of PowerN/AN/A

Performance-Curve-of-C220-10A-Engine-for-Vehicle.webp

System Technical Data of DCEC C220-10A Automotive Drive Engine

Air Intake SystemMaximum Temperature Rise Between Ambient Air and Engine Air Inlet15
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Medium Duty2.9 (300) kPa (mmH2O)
Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Heavy Duty3.7 (380) kPa (mmH2O)
Maximum Intake Restriction with Dirty Filter6.2 (635) kPa (mmH2O)
Turbocharged & IntercooledMaximum Intake Manifold Temperature-Second Level55
Maximum Intake Manifold Temperature-Three-Level50
Intercooler Cooling Temperature-Second Level25
Intercooler Cooling Temperature-Three-Level20
Maximum Allowable Pressure Difference Before and After Intercooling-Three-Level16.7 (125) kPa(mmHg)
Minimum Inlet Pipe Diameter Allowed-Three-Level75 mm
Exhaust SystemMaximum Back Pressure Imposed by Complete Exhaust System10.0 (75) kPa (mmHg)
Exhaust Pipe Size Normally Accepable75 mm
Maximum Static Bend Allowed for Turbocharger Exhaust FlangeN/A
Lubrication SystemLow oil Level Inclination Angle-Front Up45 °
Low oil Level Inclination Angle-Back Up45 °
Low oil Level Inclination Angle-Fuel Pump Side Up45 °
Low oil Level Inclination Angle-Exhaust Side Up45 °
Oil Sump Capacity-Upper Limit14.2 L
Oil Sump Capacity-Lower Limit12.4 L
Capacity of The Whole System16.4 L
Cooling SystemCoolant Capacity – Engine only9 L
Standard Thermostat (Modulating) Range83 – 95
Minimum Fill Rate ( Without Low Level Alarm)19 L/min
Minimum Coolant Expansion Space – % of System Capacity6 %
Water Tank Capacity Without Water Expansion6 L
Maximum Coolant Pressure (Without Pressure Cap, Thermostat Closed)276 kPa
Maximum Degassing Time25 mins
Maximum Coolant Flow to Accessories41 L/min
Maximum Coolant Temperature Engine out100
Minimum Allows Pressure of Pressure Cap50 kPa
Minimum Recommended Coolant Temperature70
Common Operating Temperature Range of Fans with Fan Clutch93
Maximum Coolent Temperature For Engine Protection Control100
The Limit Environmental Temperature at Rated SpeedSecond Level 45 ;Three-Level 42
The Limit Environmental Temperature at Peak TorqueSecond Level 40 ;Three-Level 37
24V Electrical SystemMaximum Allowable Resistance of Cranking Circuit0.002
The Cold Start Current When Engine and The Clutch Separate12 V 500 24 V 250
Cold Starting SystemMaximum Unaided Cold Start Temperature120 RPM -10  
Maximum Aided Cold Start Temperature110 RPM -35  
Fuel SystemMaximum Fuel Return Resistance520 (mmHg)
Maximum Inlet Resistance of oil Pump with Clean Filter150 (mmHg)
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

Global Activity

WhatsApp Online logo

Sales Team

Parts-PartMacWhatApp-Icon


Sales Manager-Mrs.Wendy Fu WhatApp-Icon

Sales Director-Mr.Jasper Lee WhatApp-Icon

Shipping ServiceWhatApp-Icon

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.fleetguard-filter.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest