Fleetguard FS36233 00MX Oil-Water Separator
The FS36233 00MX is a high-performance spin-on fuel-water separator belonging to the FS3 Series, specifically designed for modern commercial vehicles and construction machinery. As a premium aftermarket replacement, it is fully compatible with Yuchai engines and other National V/VI diesel powertrains, providing a reliable solution for fuel system protection in rigorous operating conditions.
This unit integrates advanced filtration media to achieve superior contaminant retention and efficient water separation. Effectively removing particulates and free water from diesel fuel, it safeguards sensitive fuel injectors and pumps from abrasion and corrosion, directly contributing to sustained engine power and performance.
Crafted with a robust steel housing and high-quality sealing components, the FS36233 00MX ensures exceptional durability and structural integrity. Its standard spin-on design allows for quick, tool-free installation, minimizing maintenance time and equipment downtime, making it an ideal choice for fleet operators and service professionals seeking both quality and convenience.
Advantages of FS36233 00MX Oil-Water Separator
High Efficiency Filtration: Boasts a high-efficiency filter media with excellent dirt-holding capacity and water separation performance, effectively capturing fine contaminants to protect critical fuel system components and extend service intervals.
Perfect Compatibility: Engineered as a direct OEM replacement, it ensures a precise fit and seamless integration with a wide range of commercial vehicle engines, eliminating the need for modifications and ensuring reliable operation.
Rugged Construction: The heavy-duty steel canister and premium nitrile rubber seals are designed to withstand extreme temperatures, high vibration, and harsh environmental conditions, ensuring long-lasting performance and durability.
Cost-Effective Solution: By reducing the risk of expensive fuel system repairs and optimizing engine efficiency, this separator significantly lowers the total cost of ownership, providing excellent value and a quick return on investment for users.
Technical Specifications
| Part Number: | FS36233 00MX |
| Filter Type: | Spin-on Fuel/Water Separator |
| Dimensions: | Outer Diameter≈93 mm, Overall Height≈174 mm |
| Connection Specs: | Thread Specification: M16×1.5 |
| Filtration Precision: | 10 μm |
| Filtration Efficiency: | ≥98% (ISO 4548 Standard) |
| Applicable Models/Platforms: | Yuchai National V/VI Engines |
| Operating Conditions: | -40℃ ~ +120℃ |
| Lead Time: | 15 – 30 Working Days |
| Payment Terms: | T/T ,L/C |
| Dimensions | Connection Specs |
| Filtration Efficiency |
| FS36233 00MX | Outer Diameter≈93 mm, Overall Height≈174 mm | Thread Specification: M16×1.5 | 10 μm | ≥98% (ISO 4548 Standard) |
| FS36263 00MX | Outer Diameter≈95 mm, Overall Height≈210 mm | Thread Specification:M22×1.5 | 3 μm | ≥99% (ISO 4548 Standard) |
| FS36247 00MX | Outer Diameter≈108 mm, Overall Height≈ 200 mm | Thread Specification: 1″-14 UN | 4 μm | ≥98% (ISO 4548 Standard) |
| FS36259 00MX | Outer Diameter≈108.3 mm , Overall Height≈ 291 mm | Thread Specification:1″-14 UNF | 5 μm | ≥98% (ISO 4548 Standard) |
| FS36239 00MX | Outer Diameter≈93 mm, Overall Height≈192 mm | Thread Specification: 1″-14 UNF | 4 μm | ≥97% (ISO 4548 Standard) |
| FS36240 00MX | Outer Diameter≈116 mm, Overall Height≈178 mm | Thread Specification: M16 × 1.5 | 10μm | ≥98% (ISO 4548 Standard) |
| FS36209 00MX | Outer Diameter≈93 mm, Overall Height≈200 mm | Thread Specification: M20×1.5 | 4 μm | ≥98% (ISO 4548 Standard) |
| FS36235 00MX | Outer Diameter≈93 mm, Overall Height≈165 mm | Thread Specification: M16×1.5 | 10 μm | ≥98%(ISO 4548 Standard) |
| FS36235S 00MX | Outer Diameter≈93 mm, Overall Height≈165 mm | Thread Specification: M16×1.5 | 10 μm | ≥98%(ISO 4548 Standard) |
| FS36239 00MX | Outer Diameter≈93 mm, Overall Height≈174 mm | Thread Specification: M16×1.5 | 10 μm | ≥98% (ISO 4548 Standard) |
| FS36267B 00MX | Outer Diameter≈110mm, Overall Height≈230mm | Thread Specification: 1-14 UNF | 10μm | ≥97% (ISO 4548 Standard) |
| FS36210 00MX | Outer Diameter≈111mm, Overall Height≈256mm | Thread Specification: 1″-14 UNF | 10μm | ≥97% (ISO 4548 Standard) |
| FS36234 B-AA 00MX | Outer Diameter≈110mm, Overall Height≈245mm | Thread Specification:1″-14 UNF | 10μm | ≥97% (ISO 4548 Standard) |
| FS36234 00MX | Outer Diameter≈110mm, Overall Height≈240mm | Thread Specification:1″-14 UNF | 10μm | ≥97%(ISO 4548 Standard) |
| FS36267 00MX | Outer Diameter≈110mm, Overall Height≈235mm | Thread Specification: 1″-14 UNF | 10μm | ≥97%(ISO 4548 Standard) |
| FS36277 00MX | Outer Diameter≈112mm, Overall Height≈240mm | Thread Specification: 1″-14 UNF | 10μm | ≥97% (ISO 4548 Standard) |
| FS36204 00MX | Outer Diameter≈108mm, Overall Height≈228mm | Thread Specification: 1″-14 UNF | 10μm | ≥97% (ISO 4548 Standard) |
| FS36229 00MX | Outer Diameter≈82.7mm, Overall Height≈176mm | Thread Specification: 3/4-16 UNF-2B Thread | 5μm | ≥99% (ISO 4548 Standard) |
| FS36248 | Outer Diameter≈95mm, Overall Height≈210mm | Thread Specification: 1-14 UNF-2B Thread | 5μm | ≥99% (ISO 4548 Standard) |
| FS36249 | Outer Diameter≈110mm, Overall Height≈285mm | Thread Specification: M18×1.5 | 5μm | 99.9% (ISO 4548 Standard) |
| FS36261 | Outer Diameter≈115mm, Overall Height≈300mm | Thread Specification: M20×1.5 | 5μm | 99.9% (ISO 4548 Standard) |
| FS36215 | Outer Diameter≈120mm, Overall Height≈320mm | Thread Specification: M18×1.5 | 5μm | 99.9% (ISO 4548 Standard) |
| FS36279 | Outer Diameter≈118mm, Overall Height≈295mm | Thread Specification:M18×1.5 | 5μm | 99.9% (ISO 4548 Standard) |
| ——END—— | ||||
General Infomation of DCEC C220-10A Automotive Engine | |||
| Engine Model | C220-10A | Advertised Power | 220 HP @ 2400 RPM |
| Peak Torque | 780 N.m @ 1500 RPM | Curve&Datasheet | FR 91484 |
| Fuel System | Bosch P7100 Pump | No. Of Cylinders | 6 |
| Aspiration | Turbocharged & Air Intercooler | Displacement | 8.3 L |
| Bore * Stroke | 114 mm * 135 mm | CPL Code Revision | 8418 |
| Dry Weight | 617 kg | Wet Weight | 636 kg |
| Compression Ratio | 17.3 : 1 | ||
Installation Data of DCEC C220-10A Automotive Engine | |||
| Center of Gravity. Distance From Front Face of Block | 427 mm | ||
| Center of Gravity. Distance Above Crank Centerline(Above Crankshaft) | 163 mm | ||
| Maximum Bending Moment At Rear Face of Block | 1356 N.m | ||
| Maximum Crankshaft Thrust Bearing load limit- Intermittent load | 3558 N | ||
| Maximum Crankshaft Thrust Bearing load limit-Continuous load | 2670 N | ||
| Instantaneous Inertia At Rotating: (Without Flywheel) | N/A | ||
| Emissions Certification | GB17691/GB14761 | ||
| Idle Speed | 800 RPM | ||
| Maximum Non-Load Speed | 2720 RPM | ||
| Over Speed Performance (Within 15 Seconds) | 3500 RPM | ||
| The Clutch Torque @ 800Rpm | 495 N.m | ||
| Maximum Altitude At Which Continuous operation Is Allowed | 3000 m | ||
| Supercharger outlet Exhaust Pressure limit Value | 450 kPa | ||
| Maximum Power of Exhaust Brake | 114 kW | ||
| ——END—— | |||
Engine Performance Data Rated power of DCEC C220-10A Automotive Drive Engine | |||||
| Rated Power | Torque Peak | Rated Power | Torque Peak | ||
| Engine Speed | 2400 RPM | 1500 RPM | Exhaust Temperature | 625 ℃ | 602 ℃ |
| Oil Pressure | 345 kPa | 282 kPa | Fuel Consumption | 43 L/hr | 26.9 L/hr |
| The Air Flow | 18.9 m³/min | 9.1 m³/min | Coolant Flow | N/A | N/A |
| The Flow Rate of Pressurized Air | N/A | N/A | Heat Loss Coolant | 77 kW | 60 kW |
| Pressurized Air Pressure | N/A | N/A | Heat Loss Air | 46 kW | 14 kW |
| The Exhaust Flow | 45 m³/min | 21.3 m³/min | Mechanical Loss of Power | N/A | N/A |
System Technical Data of DCEC C220-10A Automotive Drive Engine | ||
| Air Intake System | Maximum Temperature Rise Between Ambient Air and Engine Air Inlet | 15 ℃ |
| Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Medium Duty | 2.9 (300) kPa (mmH2O) | |
| Maximum Intake Restriction with Dry Type Air Cleaner,with Clean Filter-Heavy Duty | 3.7 (380) kPa (mmH2O) | |
| Maximum Intake Restriction with Dirty Filter | 6.2 (635) kPa (mmH2O) | |
| Turbocharged & Intercooled | Maximum Intake Manifold Temperature-Second Level | 55 ℃ |
| Maximum Intake Manifold Temperature-Three-Level | 50 ℃ | |
| Intercooler Cooling Temperature-Second Level | 25 ℃ | |
| Intercooler Cooling Temperature-Three-Level | 20 ℃ | |
| Maximum Allowable Pressure Difference Before and After Intercooling-Three-Level | 16.7 (125) kPa(mmHg) | |
| Minimum Inlet Pipe Diameter Allowed-Three-Level | 75 mm | |
| Exhaust System | Maximum Back Pressure Imposed by Complete Exhaust System | 10.0 (75) kPa (mmHg) |
| Exhaust Pipe Size Normally Accepable | 75 mm | |
| Maximum Static Bend Allowed for Turbocharger Exhaust Flange | N/A | |
| Lubrication System | Low oil Level Inclination Angle-Front Up | 45 ° |
| Low oil Level Inclination Angle-Back Up | 45 ° | |
| Low oil Level Inclination Angle-Fuel Pump Side Up | 45 ° | |
| Low oil Level Inclination Angle-Exhaust Side Up | 45 ° | |
| Oil Sump Capacity-Upper Limit | 14.2 L | |
| Oil Sump Capacity-Lower Limit | 12.4 L | |
| Capacity of The Whole System | 16.4 L | |
| Cooling System | Coolant Capacity – Engine only | 9 L |
| Standard Thermostat (Modulating) Range | 83 – 95 ℃ | |
| Minimum Fill Rate ( Without Low Level Alarm) | 19 L/min | |
| Minimum Coolant Expansion Space – % of System Capacity | 6 % | |
| Water Tank Capacity Without Water Expansion | 6 L | |
| Maximum Coolant Pressure (Without Pressure Cap, Thermostat Closed) | 276 kPa | |
| Maximum Degassing Time | 25 mins | |
| Maximum Coolant Flow to Accessories | 41 L/min | |
| Maximum Coolant Temperature Engine out | 100 ℃ | |
| Minimum Allows Pressure of Pressure Cap | 50 kPa | |
| Minimum Recommended Coolant Temperature | 70 ℃ | |
| Common Operating Temperature Range of Fans with Fan Clutch | 93 ℃ | |
| Maximum Coolent Temperature For Engine Protection Control | 100 ℃ | |
| The Limit Environmental Temperature at Rated Speed | Second Level 45 ℃;Three-Level 42 ℃ | |
| The Limit Environmental Temperature at Peak Torque | Second Level 40 ℃;Three-Level 37 ℃ | |
| 24V Electrical System | Maximum Allowable Resistance of Cranking Circuit | 0.002 Ω |
| The Cold Start Current When Engine and The Clutch Separate | 12 V 500 24 V 250 | |
| Cold Starting System | Maximum Unaided Cold Start Temperature | 120 RPM -10 ℃ |
| Maximum Aided Cold Start Temperature | 110 RPM -35 ℃ | |
| Fuel System | Maximum Fuel Return Resistance | 520 (mmHg) |
| Maximum Inlet Resistance of oil Pump with Clean Filter | 150 (mmHg) | |
| ——END—— | ||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
Report & Certifcate
Other Models in this Series
-
Fleetguard FS36209 00MX Oil-Water Separator
-
Fleetguard FS36263 00MX Oil-Water Separator
-
Fleetguard FS36247 00MX Oil-Water Separator
-
Fleetguard FS36259 00MX Oil-Water Separator
-
Fleetguard FS36239 00MX Oil-Water Separator
-
Fleetguard FS36240 00MX Oil-Water Separator
-
Fleetguard FS36233 00MX Oil-Water Separator
-
Fleetguard FS36235 00MX Oil-Water Separator
-
Fleetguard FS36235S 00MX Oil-Water Separator
-
Fleetguard FS36239 00MX Oil-Water Separator
-
Fleetguard FS36267B 00MX Oil-Water Separator
-
Fleetguard FS36210 00MX Oil-Water Separator
-
Fleetguard FS36234 B-AA 00MX Oil-Water Separator
-
Fleetguard FS36234 00MX Oil-Water Separator
-
Fleetguard FS36267 00MX Oil-Water Separator
-
Fleetguard FS36277 00MX Oil-Water Separator
-
Fleetguard FS36204 00MX Oil-Water Separator
-
Fleetguard FS36229 00MX Oil-Water Separator
-
Fleetguard FS36248 Oil-Water Separator
-
Fleetguard FS36249 Oil-Water Separator
-
Fleetguard FS36261 Oil-Water Separator
-
Fleetguard FS36215 Oil-Water Separator
-
Fleetguard FS36279 Oil-Water Separator
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}
